English  

SioGreen Pre-Owned Infrared Tankless Water Heater IR-260POU





$209.99

Add to Cart:

  • Description
  • Details
  • Reviews

Sio Green Pre-Owned IR-260 POU Electric Infrared Tankless Water Heater

Instant Hot Water, Cost-Effective, Corrosion-Free, No Lime Scale, No Algae, and No Bacteria
220/240 volt - 10/30 Amp - 6kW

Recommended Point of Use:  Sink Only
 

US Seller

Offered BY MANUFACTURER

These units are customer returns.  They have been inspected and tested.  The units have been packaged for resale.  Some of the units may have cosmetic damage and blemishes.   In order to qualify for the SioGreen warranty, the unit must be registered and must be installed by a licensed contractor. 

Images of the unit in this listing are stock photos from SioGreen.  They are not of the pre-owned units, therefore if you receive a unit with cosmetic flaws, please note it has been disclosed in this listing. 


 

Previous technology, which accounts for a majority of the homes today, will heat a tank full of water from the inside with metallic heating elements. The elements eventually corrode and efficiency decreases rapidly. This leads to high electricity bills, unhealthy water, and expensive equipment costs for maintenance or product replacement.

In most electric tankless designs, water flows past heating coils to produce the on-demand hot water, rather than keeping it stored.

However, the results are still the same.

SioGreen Tankless offers Space Savings, Lower Equipment Costs, Improved IAQ/No NOX, Reduced Energy Cost, Environmental Benefits, Maintenance Free Operation, Long Life-Span, Water Conditioning, Safe Recovery Mode and Recyclable Materials.

 

  • HOT WATER ANYTIME!   Sio Green is one of the best tankless water heater point of use available. This premium small tankless unit is ideal for your hand or dish wash needs. The infrared heating design heats ONLY the water you use which results in time and money savings!
     
  • PATENTED TECHNOLOGY! No metal elements, no corrosion, and no maintenance. That’s right! The SioGreen IR-260 POU electric tankless water heater creates heat without direct contact with metals. This, in turn, prevents corrosion, limescale deposit, and calcium buildup. As a result, you spend $0 on maintenance, No replacement parts, No filter required.
     
  • 100% SATISFACTION OR YOUR MONEY BACK! We will honor a 30 return policy. If you are not satisfied with your space-saving and practical Point of Use tankless water heater we will offer your money back. The unit must be in 100% new condition to be returned for a full refund. If the unit has been installed and you are not happy, you still may return it for a refund less restocking fee. Get yours now while supplies last!
  • SAVES SPACE! This unit is not much larger than a legal pad at 14 x 12.4 x 4.25 inches it is ideal for small bathrooms, utility rooms, garage sinks, kitchen sinks both indoor and outdoor, cabin, and much more. The ergonomic size and simple innovative construction allow for installation almost anywhere. It can be used as a booster with your existing tank or used in hotels, stores or restaurants where it can deliver endless gallons of hot water on demand.
     
  • ADJUSTS TO FIT YOUR NEEDS! The SioGreen IR-260 POU electric tankless water heater features 4 power levels (1-4). You can easily adjust the current from 5 Amps up to 30 Amps which results in 1 kW to 6 kW of power. which is ideal for any home application. You can also fine-tune your temperature settings more by using the water flow regulator that is included with the unit.
     

Downloadable PDF Manual


 

THE FUTURE IS HERE!

 

How Infrared Works

 

Far-Infrared

A point-of-use infrared tankless water heater can turn virtually any water source into an endless supply of hot water, without having to install a full, whole-building hot water heater or expand an existing water heating system.

 

If you are adding a bathroom or kitchen area, upgrading a home or office, improving a camper or motor home, remodeling a cabin or apartment, or planning to add hot water capabilities to any property, the point of use infrared tankless water heater may be the best choice for you.

 



Why SioGreen?

Easy to install.
Maintenance Free Operation.
Conditions the water.
Superior Heating Efficiency.

Reduces Energy Cost up to 65% compared to any current Electric Tankless Water Heater on the Market.
Uses lower amperage, maintains higher water flow capacity, and integrates into various applications.

Environmentally Friendly footprint

Many of the SioGreen units are EXCELLENT for use in Hybrid hot water delivery systems.
The larger SioGreen units integrate well with Radiant Heated Floor Systems.
It can be installed in series and for recirculation.
Longevity (more than ten years)

 

Design Features


– Thermostatic Intelligent Fuzzy Logic PID Temperature Controller
– Fully Modulating Power Control
– LED Temperature Outlet/Set Display ( °F/ °C setting)
– Compact Design for Space Saving
– Superior Energy Efficient (98%)– Continuous Hot Water On-Demand
– Self Cleaning Design for Maintenance-Free Operation

 
 

Safety Features

– Overheat Thermal Cut Off Fuses
– High Limit Temperature Safety Cut Off
– Outlet Thermocouple Constantly Monitor Temperature and Anti-Scald Protection
– Residual Leakage Current Detection

 

Hybird Applicatons

Hybrid ApplicationsY

 

Certifications

 

 
 
WRAS   CE Marking   MET Labs
 

SioGreen Infrared Tankless Technology

SioGreen today is the only manufacturer in the world that produces an instant hot water system with an Infrared Quartz heating element that serves distributors in North America, Europe, and Asia.

All water heaters rely on a heating element of some type, generally, this is in the form of hot metal components.

Normally when the metal elements are introduced to direct contact with water, only the water in the immediate area of the heating element is affected. This can actually reduce the flow rates in the attempt to heat the water.

Infrared technology works on the molecular level and because the far-infrared rays affect all of the water it gets hot faster and more thoroughly.

Scientifically the water is clustered with 5-12 water molecules. When the far-infrared rays stimulate the clusters, the water molecule movement is activated. This is due to resonance absorption. The number of water molecules which form the clusters is decreased and the result is activation/agitation of the water.

As a result of this activation, the infrared energy is able to heat the excited molecules on an individual basis ensuring the water is thoroughly heated at an accelerated rate. This allows SioGreen is operating at higher flow rates.

 

Quartz heating elements

Watch This Quick Video

 

How Infrared Works

A point of use infrared tankless water heater can turn virtually any water source into an endless supply of hot water, without having to install a full, whole-building hot water heater or expand an existing water heating system.

If you are adding a bathroom or kitchen area, upgrading a home or office, improving a camper or motor home, remodeling a cabin or apartment, or planning to add hot water capabilities to any property, the point of use infrared tankless water heater may be the best choice for you.

 

Specifications

Product Specifications

Part Number IR-260POU
Item Weight 5 pounds
UPC 049447000051
Product Dimensions  14 x 12.4 x 4.25 inches
Installation Requirements Must be installed by a licensed contractor according to local building codes.
Warranty  2 Years Pro-Rated
Warranty Registration Online or fill out and submit warranty card.
Registration Time Limit Within 60 days from purchase or will revert to 1 Year Pro-Rated
Item model number IR-260POU
Power Source  220/240 VAC
Voltage  Single Phase 220 volts
Wattage  6 kW
Amperage Capacity  25 A
Recommended Main Electrical Service Panel 100 Amp
Required Breaker Size 30 Amp Double Pole
Item Package Quantity 1 unit
Special Features Easy to Install, Quiet, Quiet Close, Adjustable

Usage

Hand Wash Application Only
Suggested Geographic Location 67° and above incoming water temperature
Batteries Required  No / Not Included
Life expectancy of the Quartz Heating Elements Without direct contact with the coating, the estimated lifecycle is 10-20 years, depending on application and usage.
Insulation around Quartz Heating Elements Boiler Cotton Fiberglass
Water Connections 1/2" NPST or BSP
Suggested Wire Size 10 Gauge X (2)
Minimum Flow Rate for Activation (GPM) 0.25
Maximum Flow Rate through Unit (GPM) 1.5
Flow Rate @ 40° Temp Rise (GPM) 1
Flow Rate @ 60° Temp Rise (GPM) 0.5
Minimum / Maximum Working Pressure (PSI) 5-100
Protections Thermal / Manual
 
MODEL
POWER
(kW)
VOLTAGE
(V)
BREAKER
SIZED (A)
RECOMMENDED
ELECTRICAL
SERVICE
WIRE SIZE
(AWG)
IR-260POU
6W
220/240 VAC
30 Amp
100 Amp
10 X (2)
 

Warranty and Registration Information

Manufacturer only warrants to the original purchaser at the original installation address of purchaser (collectively, the “Buyer”) the hot water generator and its components as manufactured by the Manufacturer (the "Product") to be free from defects in materials and workmanship, under normal use and service for the period of time identified below beginning from the date of installation.

Manufacturer Warranty is only offered if the Manufacturer products are installed by a licensed contractor In accordance with National and Local Codes having jurisdiction governing the installing area, and installed to Manufacturer Specifications using all included components supplied by Manufacturer and other parts that may be required to protect equipment.

The warranty is 100% void if the unit has been opened.

 

SUCH WARRANTIES DO NOT COVER:

  • Product misuse, tampering or misapplication, accidental damage, or improper installation. Product failure caused by chemical corrosion, or freezing. Product failure due to lightning, flood or other natural or man-made calamities. Costs incurred for shipping, delivery, handling, and/or administrative charges.
  • Labor charges of any kind.

Manufacturer will replace the defective unit on a prorated basis, in accordance with the terms of this Limited Warranty, if it fails in normal use and service during the Applicable Warranty Period.

Manufacturer shall not be liable for incidental, consequential, special or contingent damages or expenses arising, directly or indirectly, from any defect in the hot water generator or the use of the hot water generator.

Manufacturer shall not be liable for any water damage arising, directly or indirectly, from any defect in the hot water generator component part(s) or from its use. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.

This warranty gives you specific legal rights and you may also have others.


Registration

Registration can be done by filling out and mailing in the warranty card or online by visiting the SioGreen website.

 

SHIPPING AND HANDLING

  • FREE Shipping to U.S. Mainland addresses only.
  • We do not offer free shipping to Alaska or Hawaii, however we do ship to those locations. Enter your zip code under the Shipping and Payments tab to get your rate.
  • We do offer International Shipping on this item, contact us for a quote.
  • When product has been paid for, we will submit the order to be processed and shipped within 24 hours. Weekends and holidays are excluded. Shipping time may vary due to your requested delivery location.
  • Your shipment will originate from a warehouse nearest to your location if possible. Most items are shipped FedEx, USPS and UPS.
  • You will receive a shipping update email containing a tracking number.
  • If your package arrives damaged, refuse the shipment and contact us. If the shipping company has left before you realize the package is damaged, contact us immediately. Concealed damages must be reported to the carrier within 24 hours of receipt.
  • All shipping and handling cost are non-refundable. If buyer provides incorrect address or refuses delivery, the original actual shipping cost will be deducted from any monies refunded.
 
 

As per our contract, we can not sell or ship to the UK or Viet Nam.

 

30 Day Returns

To help us expedite your return please follow these instructions:

  • Units must be in new unused condition the same as when shipped from the warehouse.
  • Contact us in advance for a RMA number (Return Merchandise Authorization)
  • Follow the detailed return instructions that we provide to you, which include the RMA# and shipping address to the SioGreen.
  • You will then receive your refund after a SioGreen service technician inspects the returned product and has issued a credit memo.
  • Buyer is responsible for all shipping costs associated with the 30 day return, plus all returns are subject to a restocking fee.

*Free Return Shipping only available on units with actually manufacturer defects.

Refunds will not be issued on products that have been broken or damaged! Product defects are covered by SioGreen's Warranty as verified by the manufacturer.

  • Buyer must consult with a SioGreen Service Technician and the unit deemed to have a factory defect.
  • Units not functioning properly due to "customer set up" DO NOT qualify as a manufacturer's defect.
  • Returned units that have been damaged by buyer will be subject to restock fee or possible rejection of return claim.
 

Sizing Guide and Map

How to Size a Whole House Tankless Water Heater

It is easy to determine what size of tankless water heater will work best for your application.

1.   Start with the map and determine your location.

2.   Check the chart for the number of Points of Use, (POU) you plan on using simultaneously. 

3.   Add up the requirements and check the chart to see which model is designed to meet those needs. ,/strong>

 
 

STEP 1: Look at the color chart of North America to find the average incoming water temperature in your region.

 

Map Sizing Guide

STEP 2: Look at the chart to the right for the applications that call for hot water and much they use per minute or (GPM), base on the applications you plan or running at one time your water must heat that much water per minute

 
  • Faucet Image    Image represents hand wash sink faucet with flow rate of 0.5 – 1.5 GPM, hot side only.
  • Shower Head Image    Image represents water-saver/low flow shower head with flow rate of 1.5 – 2.5 GPM, hot side only
  • Average Hot Water Temp is 105°F-115°F.
    To determine the desired temperature rise test the incoming water and subtract from the set point temperature.
    Example : 107°F set point – 57°F incoming water = needed 50°F temperature rise

  • Standard deviation:
    Power: (±) * 1kW
    Tem Rise: (±) * 3°F
    Water Flow: (±) * 0.1gpm
 
 

APPLICATIONS

  • Standard Shower Head 2.0 GPM
  • Water-Saver Shower Head 1.5 GPM
  • Bathroom Vanity Sink Faucet 0.5 – 1.5 GPM
  • Kitchen Sink 1-2 GPM
  • Bath Tub 2.5 – 4 GPM
  • Dishwasher 1-2 GPM
  • Washing Machine 1-1.5 GPM
  • Body Shower 1.6-2.0 GPM Each
  • Jacuzzi or Roman Soaker Tub 4.0-5.0 GPM
 
 

CHECK THE CHARTS BELOW


Inlet Temp: 37°F

Model Temp Rise/GPM Approx. Usage
IR-260 POU 65°/ 0.8 temp-2.png
IR-288 POU 65°/ 1.8 temp-2.png
SIO14 65°/ 1.8 Faucet Image
SIO18 65°/ 2.4 Shower Head Image  temp-2.png
 
 

Inlet Temp: 47°F

Model Temp Rise/GPM Approx. Usage
IR-30 POU 60°/ 0.5 temp-2.png
IR-260 POU 60°/ 0.8 Faucet Image
IR-288 POU 60°/ 2.0 Faucet Image
SIO14 60°/ 2.0 temp-3.png
SIO18 60°/ 2.5 temp-3.png Faucet Image Faucet Image
 
 

Inlet Temp: 52°F

Model Temp Rise/GPM Approx. Usage
IR-30 POU 55°/ 0.5 Faucet Image
IR-260 POU 55°/ 0.9 Faucet Image
IR-288 POU 55°/ 1.73 Shower Head Image Faucet Image
SIO14 55°/ 2.1 Shower Head Image Faucet Image
SIO18 55°/ 2.7 Shower Head Image Faucet Image Faucet Image
 
 

Inlet Temp: 57°F

Model Temp Rise/GPM Approx. Usage
IR-30 POU 50°/ 0.6 Faucet Image
IR-260 POU 50°/ 1.0 Faucet Image
IR-288 POU 50°/ 2.3 Shower Head Image Faucet Image
SIO14 50°/ 2.3 Shower Head Image Faucet Image
SIO18 50°/ 3.0 Shower Head Image Faucet Image
 
 

Inlet Temp: 62°F

Model Temp Rise/GPM Approx. Usage
IR-30 POU 45°/ 0.6 Faucet Image
IR-260 POU 45°/ 1.1 Shower Head Image Faucet Image
IR-288 POU 45°/ 2.5 Shower Head Image Faucet Image Faucet Image
SIO14 45°/ 2.5 Shower Head Image Faucet Image Faucet Image
SIO18 45°/ 3.3 Shower Head Image Faucet Image
 
 

Inlet Temp: 67°F

Model Temp Rise/GPM Approx. Usage
IR-30 POU 40°/ 0.7 Faucet Image
IR-260 POU 40°/ 1.2 Shower Head Image Faucet Image
IR-288 POU 40°/ 2.8 Shower Head Image Faucet Image Faucet Image
SIO14 40°/ 2.8 Shower Head Image Faucet Image Faucet Image
SIO18 40°/ 3.6 Shower Head Image Faucet Image Faucet Image
 
 

Inlet Temp: 72°F

Model Temp Rise/GPM Approx. Usage
IR-30 POU 35°/ 0.8 Faucet Image
IR-260 POU 35°/ 1.3 Shower Head Image Faucet Image
IR-288 POU 35°/ 3.1 Shower Head Image Faucet Image
SIO14 35°/ 3.1 Shower Head Image Faucet Image
SIO18 35°/ 4.0 Shower Head Image Faucet Image Faucet Image
 
 

Inlet Temp: 77°F

Model Temp Rise/GPM Approx. Usage
IR-30 POU 30°/ 0.9 Faucet Image
IR-260 POU 30°/ 1.5 Shower Head Image Faucet Image
IR-288 POU 30°/ 3.6 Shower Head Image Faucet Image Faucet Image
SIO14 30°/ 3.6 Shower Head Image Faucet Image Faucet Image
SIO18 30°/ 4.6 Shower Head Image Faucet Image Faucet Image
 

 

STEP 3: Match your location on the map, shown above, to the corresponding chart below to determine unit capacity.

 

Model Number kW Volts Minimun Breaker Max Power (AMP) Minimum Wire Dimensions Weight
IR-30 POU 3.4 110 30 Single Pole 28.3 10 13.5″x 8.5″x 2.5″ 5 lbs.
IR-260 POU 6.0 240 30 Double Pole 25 (2)10 13.5″x 8.5″x 2.5″ 5 lbs.
IR-288 POU 14 240 40 Double Pole 58.4 (2)6 18.5″x 12.5″x 3″ 13 lbs.
SIO14 14 240 2 X 30 Double Pole 58.4 (2)6 20″ x 14″ x 6″ 27 lbs.
SIO18 18 240 2 X 40 Double Pole 75 (2)4 20″ x 14″ x 6″ 27 lbs.
 

  • Model: IR260 POU REF
  • Shipping Weight: 10lbs
  • 5 Units in Stock
  • Manufactured by: SioGreen

Be the first to write a review.  Write a Review.

This product was added to our catalog on Wednesday 08 December, 2021.